PlumbingWorld.com Down to earth prices at plumbingworld.com
A World of Plumbing - low prices

Drain & Sewage Ejector Packages

see Our Home Page - see Our Search Feature - see Your Shopping Cart
see Many Other Products - see Customer's Testimonials - see Our FAQ's Page - see How to Order
With regular ground shipping we only charge 8% or less
in the Contiguous U.S.! plus processing
PlumbingWorld.com

see dual pump sewage ejection packages - see Drainosaur water removal system
see high water alarms - see more high water alarms - see sewage ejection pumps
see home water supply pumps - see the LowPro sewage ejection packages from Liberty
see Liberty Pump simplex grinder packages and sump box systems
see sewage ejection pumps and sewage basin assemblies from Little Giant

Sewage Ejector Package by Little Giant
This system consists of a #9S-CIA-RFS pump, a 30-gallon basin (22"diameter x 30"), a full-flow check valve, and a float switch. Click here to see a typical installation of this package. The basin is recessed into the floor and the pump is mounted in the bottom of it. Your fixtures drain into the basin, the fluid level rises enough to trigger the float switch which then turns on the pump and pumps the sewage up through the check valve into your regular drain line. The vent outlet is a 3" opening with a 3"x2" rubber grommet. The discharge outlet is a 2" non-threaded opening. The side inlet is set up for 4" drain pipe and can be bushed down to 3". The 9S-CIA-RFS has the following specs: cord=20', HP=4/10, watts=1020, flow rate=4800gph@5', shut-off=18' (how high it will pump before shutting off). Replacement pumps for Little Giant sewage ejector packages are available below.
#SE-LGSMPK = $524.67
#SE-9S-SMPXRT-K with check/ball valve combination = $567.21
The check/ball valve combination allows you to stop backflow from reaching the sewage package while servicing it.

We have sold many of these Little Giant brand sewage ejector packages with MANY satisfied customers!

vertical mount recommended

- Or -Click to view items already in your shopping cart

PlumbingWorld.com

Qwik Jon System very popular Qwik Jon System by Zoeller Co.
This is a polyethylene pedestal (41" x 25" x 5 1/2") that either sits on the floor or recessed to be level with the floor. The toilet is to be mounted to the top of the pedestal. Click here to see more pictures of this system. There is a .4hp sewage ejector pump (with non-clogging vortex impellers) inside the unit. It uses a 2" discharge line (passes up to 2" spherical solids) with a check valve going up from behind where the toilet sits. It will accommodate a toilet, lav sink, a bathtub, and/or a laundry sink. You can install a variety of toilets on it (toilet not included). The pump is rated at 60 GPM at 10' head, and it can lift effluent 15 feet. This great Zoeller sewage ejector system (model 100 PSF) uses standard 115 voltage (3 prong neoprene wire), can have up to a 130F (54C) temp. and has a UL listed pump. Replacement pumps for Qwik Jon Systems are available below.
Comes ALL IN ONE carton:
#SE-QJ = $619.40
or order the "best"
Model 102 (identical to above except pump is 1/2hp instead of 4/10hp):
#SE-QJ102 = $679.91

- Or -Click to view items already in your shopping cart

to sewage backup alarms

PlumbingWorld.com

Sanicompact Up Flushing Macerating Toilet System by Saniflo Sanibest system
This toilet is better than the former McPherson toilet in our view as it will grind up the sewage/effluent so fine that you can use an amazingly small 1" pipe to discharge the ground up effluent/sewage vertically 9 feet, or horizontally up to 100 feet. This complete unit, unlike the McPherson requires a standard 120-volt electric connection with the most common 15-amps service, and can easily be installed in nearly any location in the home including basement upgrades - renovations, bathroom remodeling, even attics, garages, pool houses, etc. This Sanicompact will not only dispose of waste water from the toilet, but is also capable of pumping water from one hand basin if needed. Specifications for this low flow, compact, maceration toilet: maintenance-free induction motor (it has no carbon brushes or gears) operates at 7.2 amps, 110-volts, 0.3HP, 9 gallons per minute at 9 feet of head pressure and the maximum operating temperature is 95°F. (so some attics might not be appropriate.)

*Sanicompact 48 one-piece macerating toilet w/seat - round bowl = $698.95
Replacement toilet seat for the Sanicompact 48 = $84.44
*This item ships by truck and includes a liftgate for delivery.

Please note: toilets cannot be shipped 2nd Day Air.

- Or -Click to view items already in your shopping cart

PlumbingWorld.com

Replacement Pumps for Sewage Ejector Packages


#9S-CIA-RFS
to more sewage pumps

Little Giant Replacement Sewage Ejector Pumps
with
automatic shutoffs
Model # Cord HP Wattage Voltage Flow Rate Shut-Off Price & Quantity
9S-CIA-RFS 20' 4/10 1020 115 4800gph@5' 18' $350.20
9S-CIM 15' 4/10 510 230 4800gph@5' 18' $322.54

- Or -Click to view items already in your shopping cart

PlumbingWorld.com

Zoeller Qwik Jon Replacement Pumps
Zoeller 266WM sewage pump Qwik Jon Replacement Pumps Feature:
  • Automatic level control switch
  • Thermal overload protected motor
  • Durable switch case, motor and pump housing are cast iron
  • Stainless steel screws, bolts & handle
  • Non-clogging vortex impeller
  • Passes 2" spherical solids
  • 2" Discharge
  • 10 ft. cord & plug
  • Maximum temperature 130°F
  • Durable cast iron housing
  • Corrosion resistant powder coated epoxy finish
  • Click for performance curve
For Qwik Jon Units #100, 101 and #102
Zoeller Qwik Jon Sewage Ejector Pumps:
These are replacement pumps for Qwik Jon units
Model # Description HP Amps Voltage GPM @10' Price & Quantity
WM266 Replacement Pump for Qwik Jon Systems #100 and #102 1/2 10.4 115 60 $309.34
WM211 Replacement Pump for Qwik Jon System #101 .4 5.5 115 40 $199.96

- Or -Click to view items already in your shopping cart

PlumbingWorld.com

We also sell Grundfos stainless steel sewage ejector pumps and
Grundfos s.s. effluent pumps and Grundfos s.s. sump pumps

A whole world of plumbing

sewage pumps "I want to add a toilet in my basement. However all my drain lines are above. What can I do?"
sewage pumps You can install a sewage ejector pump and basin. There are two ways to do this depending on what you want the finished product to look like and how much work you want to do. The Zoeller "Qwik Jon" can be installed with no digging at all. However, your toilet will sit up on the unit (about 5 1/2" above the floor). If you want to drain any other fixtures into it (lavs, laundry sinks, etc.) you will need to run a drain line from the fixture along the baseboard to the Zoeller basin. We have sold many "Qwik Jon" systems.

sewage systems"Can I mount the check valve horizontally?"
sewage systemsIt is recommended that the check valve (or check/ball valve combination) is mounted vertically, however each can be mounted horizontally. The installation for each unit is similar; the check valve hinge must be at the top.

"Your price for the Zoeller Qwik Jons seems so low compared to others. Are these their complete units? I mean, does it includes the pump and the basin, etc."
This is their models 100 and 102 and they are complete. We do not "bait and switch." We have sold many of them, and the volume of our purchasing and also the fact that our overhead is very low allows us to sell the complete package at the low price listed above.

little giant sewage systems "Can I safely use an air admittance valve (or "auto vent") on any of the above systems?"
Although some people have installed an air admittance valve on the above systems, we will never suggest or recommend that you do so. We always recommend installing a vent all the way to the roof (and as per your local codes). We have had people write us stating that when they installed an air admittance valve the flapper in the valve can chatter and create vibration. The right way to go is to install a non-mechanical vent, all the way to the roof, and as per your local codes.

"How is the toilet mounted to the tank on the Qwik Jon?"
Basically it's as easy as mounting a toilet to standard toilet flanges (99% of toilets today mount this way) in that you simply attach your toilet with standard toilet bolts (identically to standard toilet mounting) to the provided toilet flange.

Famous Quotes at PlumbingWorld.com
click here to read many great quotes, such as:
"When angry, count ten before you speak; if very angry, a hundred."
-- by Thomas Jefferson

at THE PlumbingWorld, we offer thousands of plumbing products and more:

Search Plumbing World:

or click here to go to our product index

PlumbingWorld.com

click to see: our privacy policy | click to: contact us | click to see: our return policy
You'll find a world of plumbing at PlumbingWorld
www.PlumbingWorld.com Copyright ©