 |
 |
 |
Some HOME GUARD questions answered
see Our Search Feature - see Your Shopping Cart
see Many Other Products - see Customer's Testimonials - see Our FAQ's Page - see How to Order
With regular ground shipping we only charge 8% or less in the Contiguous U.S.! plus processing
see the HomeGuard page - see assortment of different pumps see stainless steel hose clamps - see repair kits for pipe and hose see PVC fittings see PVC valves - see PTFE thread tape - see pipe joint compounds
Here are the answers to the most frequently asked questions:
The typical discharge is 1 1/4" (female pipe threads)
The inlet is 3/4" (female pipe threads)
It comes with a check valve.
It comes with an easy to understand, installation sheet.
The following are replaceable parts:
Pump housing
Connecting hose - 30" garden hose, 3/4" FHT swivel x hose (fits over a barbed fitting)
Hose clamp
Coupling
Ejector
Ejector seal
2 ea O rings
Calibrated weight
Nylon cord
Stop
Automatic valve
ABS gap and gasket
Poppet check valve
Normally, a primary pump should come with a check valve but if it does not have a check valve, you will need to install one (not provided).
The HOME GUARD pump should be regularly checked for its proper operation and cleanliness, especially around the suction screen and the ejector port. Clean as required.
The hose from the switch output to the pump inlet is provided - 30" garden hose, 3/4" FHT swivel x hose (fits over a barbed fitting).
The water level switch and float are provided.
1-year warranty (by Zoeller).
Anti-corrosive materials.
Use PTFE thread sealing tape on all threaded connections, need only tighten by hand.
The HOME GUARD body itself is approx. 16" tall, 5 1/4" wide. From the bottom of the pump to the top of the water supply valve is approx. 40".
If you have more questions please feel free to ask us.
 |
at THE PlumbingWorld, we offer thousands of plumbing products and more: