SuperPole™ G2 Basic
	Specifications: Floor to ceiling height range - 93" to 99" / 236 to 253 cm (standard). Custom pole heights up to 120". Pole - Heavy gauge steel, 1.5" / 3.8 cm diameter. Base - Heavy gauge steel, 5" / 12.7 cm outer diameter with SBR friction pad. Finish - High temperature baked powder coat gloss white enamel. Ceiling Plate - Steel 2.5 X 20" / 6 X 50 cm & 2 holes at 16"spacing. Pole Grip - Grey, premium quality, 20" / 50 cm long. Jackscrew - Steel, zinc plated, 1-1/8" fine cut thread. Assistance Level - 2
MODEL NUMER for SuperPole™ G2 Basic SP-S SuperPole Basic™ (standard ceiling height range 93-99") (300 lbs). SP-TS SuperPole Traveller ™ (standard ceiling height range 93-99") (300 lbs). SP-HD SuperPole Heavy Duty™ (450 lbs). SP-HD-SS SuperPole Heavy Duty™ Stainless Steel (450 lbs). CUSTOM OPTIONS for SuperPole™ G2 (Ceiling Height / Plates) SPB-XXX SuperPole™ Custom (UNDER 93") (specify ceiling height from 80-93"). SP-UF Uni-Fit Extension Tube (ranges 101-121"). SP-CPE SuperPole™ Ceiling Plate Extender (30"wide for use with 24" beam centers). SPU-XXX SuperPole™ Ultra (120"-140")
Note: The SuperPole System™ should only be installed between floors and ceilings of solid construction or injury may result. The SuperPole System™ should not be installed on loose floor coverings, in rooms with radiant ceiling heating, in mobile homes, or in suspended or angled ceilings. Recommended weight limits are 300 lbs / 136 kg for all models; no more than 150 lbs / 70 kg should be exerted on trapeze system (for repositioning and sitting up assistance only). Manufacturer has the right to change designs and specifications without notice.

Purchase the SuperPole™ G2 Basic

SuperPole™ SuperBar
	Specifications: Horizontal Support Bar - 16" / 40 cm long rail with premium quality grey grip. Bar Height Range - typically 28 to 38" from floor, with limit of 58" / 147 cm from ceiling to top of bar. Locking - 8 positions @ 45 degrees, locked if down; lift 1/4" to unlock. The locking collar is fixed to the pole with three penetrating set screws. Assistance Level - 3
MODEL NUMBER for SuperBar™ / Heavy Duty Model (450lbs) SPB-S SuperPole™ with SuperBar™ (ceiling height range 93-99") (300 lbs). SPB-HDS SuperPole™ with SuperBar™ HEAVY DUTY (user weight to 450 lbs.) SPB-AK *SuperBar™ Add-On-Kit (to add SuperBar™ to existing SuperPole™). *Strictly for use with HealthCraft SuperPole™, or injury may occur. CUSTOM OPTIONS for SuperPole™(Ceiling Height/Plates) SPB-XXX SuperPole™ w/ SuperBar™ Custom (UNDER 93") (specify ceiling height from 80-93"). SP-UF Uni-Fit Extension Tube (ranges 101-121"). SP-CPE SuperPole™ Ceiling Plate Extender (30"wide for use with 24" beam centers).
Note: The SuperPole System™ should only be installed between floors and ceilings of solid construction or injury may result. The SuperPole System™ should not be installed on loose floor coverings, in rooms with radiant ceiling heating, in mobile homes, or in suspended or angled ceilings. Recommended weight limits are 300 lbs / 136 kg for all models. Manufacturer has the right to change designs and specifications without notice.

Purchase the SuperPole™ SuperBar

SuperPole™ SuperTrapeze™
	Specifications: Support Pole - 93" to 100" / 236 to 253cm (standard). Support Arm Height Range - 12-22" / 30-55 cm from ceiling. Fixed to the pole with 3 penetrating set screws. Trapeze Handle - overall size 12X12" / 30X30 cm. Trapeze Handle - height range 42-70" / 106-178 cm from ceiling. Assistance Level - 3
MODEL NUMER for SuperPole Basic™ (Not applicable with ceilings higher than 99") STP-S SuperPole Basic™ with SuperTrapeze™ (standard ceiling height range 93-99") (300 lbs). STP-AK *SuperTrapeze™ Add-On-Kit Only STP-HS **e2™ Trapeze Handle with Strap and Hook *Strictly for use with HealthCraft SuperPole™, or injury may occur. **For upgrade of conventional chain/trapeze systems - call to review connection details. CUSTOM OPTIONS for SuperPole™ (Ceiling Height / Plates) SP-CPE SuperPole™ Ceiling Plate Extender (30"wide for use with 24" beam centers).
Note: The SuperPole System™ should only be installed between floors and ceilings of solid construction or injury may result. The SuperPole System™ should not be installed on loose floor coverings, in rooms with radiant ceiling heating, in mobile homes, or on suspended or angled ceilings. Recommended weight limits are 300 lbs / 136 kg for all models; no more than 150 lbs / 70 kg should be exerted on trapeze system (for repositioning and sitting up assistance only). Manufacturer has the right to change designs and specifications without notice.

Purchase the SuperPole™ SuperTrapeze™

SuperPole™ SuperTray™
	Specifications: Tray Size - 11 x 15"/ 28 x 40 cm with premium quality grey anti-slide mat Maximum Weight Capacity - 15 lbs / 7kg. MODEL NUMBER for SuperTray™ SPT-S SuperPole™ with SuperTray™ (ceiling height range 93-99"). SPT-AK SuperTray™ Add-On-Kit *Strictly for use with HealthCraft SuperPole™, or injury may occur. CUSTOM OPTIONS for SuperPole™(Ceiling Height/Plates) SPT-XXX SuperPole™ w/ SuperTray™ Custom (UNDER 93") (specify ceiling height from 80-93"). SP-UF Uni-Fit Extension Tube (ranges 101-121"). SP-CPE SuperPole™ Ceiling Plate Extender (30"wide for use with 24" beam centers).
Note: The SuperPole System™ should only be installed between floors and ceilings of solid construction or injury may result. The SuperPole System™ should not be installed on loose floor coverings, in rooms with radiant ceiling heating, in mobile homes, or in suspended or angled ceilings. Recommended weight limits are 300 lbs / 136 kg for all models. Manufacturer has the right to change designs and specifications without notice.

Purchase the SuperPole™ SuperTray™

SuperPole™ FRS™
Assistance Level - 2	Specifications: Effective- The SuperPole FRS™ is placed into the installed floor receptacle and secured into the receptacle by turning the knob on top of the SuperPole FRS™ pole. Floor receptacle installs flush with the finished floor surface. When not in use, the floor receptacle is sealed with a liquid-tight flush mount cap. The cap is removed by engaging two pins on the bottom of the pole into two holes in the cap, permitting the cap to be removed by turning it with the pole. The loose cap will not be lost while the pole is in the receptacle, as it has a storage location in the top knob of the pole, covered with a decorative rubber grip. Quality baked-on enamel paint finish on pole, with a durable high quality hand grip. Pole - 57" total length, 53" above floor, 1.5" dia,. Floor receptacle - 4" high x 1.95" dia - (fits into 2" cored hole)
Note: The SuperPole FRS™ should only be installed in concrete slab type floors of structurally sound design. We recommend that you have your SuperPole FRS™ installed by a qualified contractor who should pay attention to location of any in-floor structures or conduits. The locking pins on the bottom of the SuperPole FRS™ should be inspected regularly for damage. The floor receptacles should be inspected regularly Maximum suggested user weight of 450lbs/205kg. Manufacturer has the right to change designs and specifications without notice.

Purchase the SuperPole™ FRS™

SuperPole™ Safety Island™
Assistance Level - 3	Specifications: Tubular Ring - Typically 28-38"/71-97cm from floor, 18"/46cm diameter, 1.25"/3.175cm diameter tube for easy gripping Tray - 14"/36cm diameter A.B.S. tray, easy to wipe clean Tray Weight Capacity - 15lbs/7kg Floor to Ceiling Range - 93-99"/236-251cm (standard) Uni-Fit Extender™ - Increase floor to ceiling range to 100-120"/254-305cm. Sold separately. NOT TO BE USED WITH SUPERTRAPEZE™. SuperPole™ Ultra - NOT TO BE USED WITH SAFETY ISLAND™ Ceiling Plate Extender™ - Allows standard ceiling plate (20"/51cm length) to span 30"/76cm with holes for ceiling attachment to 24"/61cm ceiling beam centers. Sold separately. Pole Material - Heavy gauge steel, 1.5"/3.81cm diameter. High temperature baked powder coat gloss white enamel. Grip Material Grey, premium high quality grip, 20"/51 cm long. Does not contain natural dried rubber or latex. Washable. Expansion Mechanism - Steel jackscrew, zinc plated, 1-1/8" fine cut thread. Weight Capacity - 300lbs/136kg. Bariatric model 450lbs/205kg capacity.
Note: The SuperPole System™ should only be installed between floors and ceilings of solid construction or injury may result. The SuperPole System™ should not be installed on loose floor coverings, in rooms with radiant ceiling heating, in mobile homes, or in suspended or angled ceilings. Recommended weight limits are 300lbs/136kg for all models (excluding SuperPole™ Heavy Duty); no more than 150lbs/70kg should be exerted on trapeze system (for repositioning and sitting up assistance only). Manufacturer has the right to change designs and specifications without notice.

Purchase the SuperPole™ Safety Island™

Horizontal & Parallel Bar System™
Assistance Level - 3	Specifications: Floor to Ceiling Height Range - 93" to 99" / 236 to 253cm (standard). Custom pole heights up to 120". Pole - Heavy gauge steel, 1.5" / 3.8 cm diameter. Rail Height Range - 18"-40"/46-100 cm Rail Length - 90" standard, 120" optional Weight Capacity - 300 lbs / 136 kg Base - Heavy gauge steel, 5" / 12.7 cm outer diameter with SBR friction pad. Finish - High temperature baked powder coat gloss white enamel. Ceiling Plate - Steel 2.5 X 20" / 6 X 50 cm & 2 holes at 16" spacing. Pole Grip - Grey, premium quality, 20" / 50 cm long. Jackscrew - Steel, zinc plated, 1-1/8" fine cut thread.
MODEL NUMER for Parallel Bar System™ SP-SHR1 Horizontal Rail System, Single Rail Kit, includes 2 holder brackets, and one horizontal rail (90"long) - all items needed to install on two existing SuperPoles SP-SHR2 Horizontal Rail System, Double Rail Kit, includes 4 holder brackets, and two horizontal rails (90"long) - all items needed to install on four existing SuperPoles PB-S96 Parallel Bar Set, Complete with 4 SuperPoles™
Note: The SuperPoles™ used in the Parallel Bar System™ should only be installed between floors and ceilings of solid construction or injury may result. The Parallel Bar System™ should not be installed on loose floor coverings, in rooms with radiant ceiling heating, in mobile homes, or in suspended or angled ceilings. Recommended weight limit is 300 lbs / 136kg. Manufacturer has the right to change designs and specifications without notice.

Purchase the Horizontal & Parallel Bar System™

Smart-Rail™
Assistance Level - 1	Specifications: Support Frame - Rigid tubular steel construction. Baked enamel finish for durability. Unlike particle board based designs, it will not soak in moisture or emit odors. Works on either side of bed. (32x24" / 800x600mm overall dimensions) Support Rail - Strong tubular steel construction. Includes deluxe grip for comfort. White rubber base tips prevent slippage and protects your floor. Maximum user weight 300 lbs / 136 kg. Bed Cleats - rubber cleat style pads engage positively with bed to minimize slippage of frame. Safety Latch - unique design provides positive locking of rail at bed-side, easy unlocking (lift rail 1"/25mm to unlock), and sets height of bed rail while in the locked position. Safety Straps - holds support frame from pulling out under heavy use - two straps are supplied that simply loop around the opposite bed frame rail - tightened and released with a side release buckle.
MODEL NUMER for Smart-Rail™ SR-S Smart-Rail™ for conventional box spring and mattress beds. SR-LE Smart-Rail™ Leg Extenders (adjust rail height from 30" to 35").
Note: VERTICAL LOAD BEARING ONLY. Product intended for moderate vertical weight bearing on rail only. Do not use if sideward (lateral) support is needed. Avoid rail latch unlocking - Ensure that rail is at least 2"/50mm off floor when rail is in locked position. (Soft type box spring beds can compress downward under load allowing support frame to move down, and rail to become unlatched). Do not use on wet or slippery floors. Do not use with electric or hospital style beds. Both supplied straps must be installed for secure operation. Product intended for moderate assist with sitting up and standing only. Maximum user weight 300 lbs/136kg. Manufacturer has the right to change designs and specifications without notice.

Purchase the Smart-Rail™

Advantage Rail™
Assistance Level - 3	Specifications: Pivoting and Locking Horizontal Bar - 17" / 40 cm long rail with premium quality grey grip. Bar Height Range - five settings between 30-38" / 75 - 95cm. Pole Height Range - 47-55" Locking - 8 positions @ 45 degrees, locked if down; lift 1/4" to unlock. Floor Plate - Six hole floor screw pattern (6 X 3/8" holes on 6.75" diameter) & 2 holes at 16" spacing. Weight Capacity - 300 lbs capacity
MODEL NUMER for Advantage-Rail Portable™ AR-T Advantage Rail™ Standard "T" Handle
Note: The Advantage Rail™ should only be installed in floors of solid construction or injury may result. Recommended weight limits are 300 lbs / 136 kg for all models. Manufacturer has the right to change designs and specifications without notice.

Purchase the Advantage Rail™

Advantage Rail Portable™
Assistance Level - 3	Specifications: Floor Plate - Six hole floor screw pattern (6 X 3/8" holes on 6.75" diameter) 2 holes at 16" spacing. Weight Capacity - 300 lbs capacity MODEL NUMER for Advantage Rail/Pole Portable™ AR-PT Advantage Rail™ Portable "T" Handle (includes one floor plate) AR-FP Advantage Rail™ Low Profile Floor Plate
Note: The Advantage Rail/Pole Portable™ should only be installed in floors of solid construction or injury may result. Recommended weight limits are 300 lbs / 136 kg for all models. Manufacturer has the right to change designs and specifications without notice.

Purchase the Advantage Rail Portable™

Advantage Pole™
Assistance Level - 2	Specifications: Independence - For those who require minimal assistance to achieve a standing or sitting position. Floor Plate - Six hole floor screw pattern (6 X 3/8" holes on 6.75" diameter) 2 holes at 16" spacing. MODEL NUMER for Advantage Pole AR-AP Advantage Pole 350™ Pole Only AR-AP-CK Advantage Pole 350™ Conversion Kit (Convert AR-T to AR-AP) AR-TS-CK Advantage Pole 350™ Standard "T" Handle (Convert AR-AP to AR-T)
Note: The Advantage Pole 350™ should only be installed in areas where the floor is structurally sound. If you are not equipped to undertake the outlined work we recommend that you have your Advantage Pole 350™ installed by a qualified contractor. Unit must be secured to floor with fasteners appropriate to the floor material - fasteners must be rated for at least 400lbs/188kg retention force each (see within for recommendations). Floor mount fasteners should be inspected monthly and tightened if necessary. Maximum suggested user weight of 450lbs/205kg. Manufacturer has the right to change designs and specifications without notice.

Purchase the Advantage Pole™

PT Rail™ Wall Rail System
Assistance Level - 2	Specifications: Rail Length - 28" & 32" from wall to tip of rail Rail Diameter - 1-1/2" (ADA compliant) Rail Offset - 6" vertical, 1-1/2" horizontal offset Wall Plate - 5.5" x 9" with 4 fastener holes (3/8" dia.) Construction - Alloy steel, with baked enamel Pivot Joint - fluid feel pivot, tested to over 75 years daily usage Weight Capacity - 400 lbs.
MODEL NUMER for P.T. Rail Fold Away™ PT-WR28L Wall Rail Hinged, Left Side 28" PT-WR28R Wall Rail Hinged, Right Side 28" PT-WR32L Wall Rail Hinged, Left Side 32" PT-WR32R Wall Rail Hinged, Right Side 32"	MODEL NUMER for P.T. Rail Fixed™ PT-FIX28L Wall Rail Fixed, Left Side 28" PT-FIX28R Wall Rail Fixed, Right Side 28" PT-FIX32L Wall Rail Fixed, Left Side 32" PT-FIX32R Wall Rail Fixed, Right Side 32"
Note: The P.T. Rail™ should only be installed in areas where the mounting surface is structurally sound. If you are not equipped to undertake the outlined work we recommend that you have your P.T. Rail™ installed by a qualified contractor. The P.T. Rail™, ( or P.T. Rail Floor Mast System™) must be secured to wall (or floor) with fasteners appropriate to the structural material. Fasteners must be rated for certain retention force each for maximum weight capacity (see within for recommendations). Mounting fasteners should be inspected monthly and tightened if necessary. Rail is capable of supporting a maximum suggested user weight of 400lbs/181kg. Note: Due to variances in needs, materials and local construction methods, the information contained within concerning mounting location, fasteners and wall fabrication is provided as suggestion only. Consult the appropriate local professionals for best advice. Manufacturer has the right to change designs and specifications without notice.

Purchase the P.T. Rail Fixed™

ModRail™
Assistance Level - 3	Specifications: Pole (Mast) - 24" length, 1-1/2" diameter. Triple Rail Side Gate - 4" spacing between each rail, 16" length, 1-1/4" diameter. Pivoting & Locking Bar - 16" length, 1-1/4" diameter. Threaded Top Grip (Removable) - 13" long, 1-1/4" diameter. Rail Assembly - Adjustable range 4" (overall height of rail assembly dependant on bed height) Brackets available for - For single to king home style beds (box spring and mattress beds with metal angle iron frame). NOTE: For queen and king sized beds, a middle strut is required on the metal bed frame for the bracket to be properly secured. If your home style bed does not have a middle strut, you must let us know when placing order. Weight Capacity - 325 lbs.
Note: Prior to installing the ModRail™ System, we strongly recommend that you first read through the instructions. It is your responsibility to see that your ModRail™ System is properly assembled, installed, operated, and cared for. Failure to follow these instructions could result in injury or death. Modular rail assembly options (ModRailTM System, ModBar™, ModPole™, & ModRail™ Add-On-Kits & Accessories) are designed to fit ONLY on HealthCraft's ModRail™ System. NOTE: The support bracket is bolted securely to the stationary section on the metal frame of the bed. The modular options are secured into the bed receptacle system with a threaded knob. Inspect the ModRail™ System regularly, including bolts, set screws, knurled knobs, and add-ons. Maximum suggested user weight is 325 lbs / 147kg. Lock / remove casters on mobile beds prior to using rail. Note: Due to variances in needs, materials and local construction methods, the information contained within concerning mounting location, fasteners and wall fabrication is provided as suggestion only. Consult the appropriate local professionals for best advice. ENTRAPMENT WARNING: Due to the potential risks associated with head / limb entrapment, the ModRail™ is not recommended for users with the following conditions: erratic body movements, altered mental status, pre-existing conditions such as confusion, restlessness and dementia. Manufacturer has the right to change designs and specifications without notice.

Purchase the ModRail™

AssistaRail™
Assistance Level - 2	Specifications: Assista-Rail™ - Heavy gauge steel, .875" diameter. High temperature baked powder coat gloss white enamel. Extends under mattress 24", up from the mattress 16" and along the side of the bed 18". Grip Material - Grey, NPVC non-latex grip. 27" long x 1.25" diameter. Traction Grip Material - Grey, premium quality, non-latex grip. 4.5" long x .84" diameter (x4). Side Release Buckle - Polypropylene strap 1" x 100" length. Weight Capacity: 300 lbs.
Note: VERTICAL LOAD BEARING ONLY - DO NOT use if you require more than minimal sideward (lateral) support. Maximum user weight 300lbs/136kg. Do not use with electric or hospital style beds. Supplied strap must be installed, tightened and regularly inspected for secure operation. Lock casters on mobile beds prior to using rail. Due to the potential risks associated with neck entrapment, the Assista-Rail™ is not recommended for users with the following conditions: erratic body movements, altered mental status, pre-existing conditions such as confusion, restlessness and dementia. Note: Due to variances in needs, materials and local construction methods, the information contained within concerning mounting location, fasteners and wall fabrication is provided as suggestion only. Consult the appropriate local professionals for best advice. ENTRAPMENT WARNING: Due to the potential risks associated with head / limb entrapment, the ModRail™ is not recommended for users with the following conditions: erratic body movements, altered mental status, pre-existing conditions such as confusion, restlessness and dementia. Manufacturer has the right to change designs and specifications without notice.

Purchase the AssistaRail™

DependaBar™
Assistance Level - 3	Specifications: Pivot Rail - 1.25" grip diameter, stainless steel construction. Pivot Rail Height - 30-1/2" vertical rail height. Pivot Rail Length - "P" shaped dual rail extends 18" length from bathtub wall (6" spacing between horizontal rails). Locks every 45° (5 positions). Horizontal Grab Bar - 1-1/4" grip diameter. 1-1/2" clearance from wall (ADA compliant). Height adjustable at time of installation, typically 4" cm from top of bathtub surface. Stainless steel construction. Horizontal Grab Bar Lengths - 18" and 32" lengths available. Weight Capacity: 325 lbs.
	Note: The Dependa-Bar™ should only be installed in areas where the mounting surface is structurally sound. If you are not equipped to undertake the outlined work we recommend that you have your Dependa-Bar™ installed by a qualified contractor. The Dependa-Bar™ must be secured to wall with fasteners appropriate to the structural material. Fasteners must be rated for certain retention force each for maximum weight capacity (see within for recommendations). Mounting fasteners should be inspected monthly and tightened if necessary. Rail is capable of supporting a maximum suggested user weight of 325lbs/147kg. Note: Due to variances in needs, materials and local construction methods, the information contained within concerning mounting location, fasteners and wall fabrication is provided as suggestion only. Consult the appropriate local professionals for best advice. Manufacturer has the right to change designs and specifications without notice.

Purchase the DependaBar™